元器件交易网www.cecb2b.comSN55461 THRU SN55463SN75461 THRU SN75463DUAL PERIPHERAL DRIVERSSLRS022A – DECEMBER 1976 – REVISED OCTOBER 1995PERIPHERAL DRIVERS FORHIGH-VOLTAGE, HIGH-CURRENT DRIVERAPPLICATIONSSN55461, SN55462, SN55463...JG PACKAGESN75461, SN75462, SN75463...D OR P PACKAGE(TOP VIEW)••••••••• Characterized for Use to 300 mAHigh-Voltage OutputsNo Output Latch-Up at 30 V (AfterConducting 300 mA)Medium-Speed SwitchingCircuit Flexibility for Varied Applicationsand Choice of Logic FunctionTTL-Compatible Diode-Clamped InputsStandard Supply VoltagesPlastic DIP (P) With Copper Lead Frame forCooler Operation and Improved ReliabilityPackage Options Include Plastic SmallOutline Packages, Ceramic Chip Carriers,and Standard Plastic and Ceramic 300-milDIPsSUMMARY OF SERIES 55461/75461DEVICESN55461SN55462SN55463SN75461SN75462SN75463LOGICANDNANDORANDNANDORPACKAGESFK, JGFK, JGFK, JGD, PD, PD, P1A1B1YGND12348765VCC2B2A2YSN55461, SN55462, SN55463...FK PACKAGE(TOP VIEW)NC1ANCVCCNCNC1BNC1YNC4567832120191817161514910111213NC2BNC2ANCNC – No internal connectiondescriptionThese dual peripheral drivers are functionally interchangeable with SN55451B through SN55453B andSN75451B through SN75453B peripheral drivers, but are designed for use in systems that require higherbreakdown voltages than those devices can provide at the expense of slightly slower switching speeds. Typicalapplications include logic buffers, power drivers, relay drivers, lamp drivers, MOS drivers, line drivers, andmemory drivers.The SN55461/SN75461, SN55462/SN75462, and SN55463/SN75463 are dual peripheral AND, NAND, andOR drivers respectively (assuming positive logic), with the output of the gates internally connected to the basesof the npn output transistors.Series SN55461 drivers are characterized for operation over the full military temperature range of –55°Cto 125°C. Series SN75461 drivers are characterized for operation from 0°C to 70°C.PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.Copyright © 1995, Texas Instruments IncorporatedPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•NCGNDNC2YNC1元器件交易网www.cecb2b.comSLRS022A – DECEMBER 1976 – REVISED OCTOBER 1995SN55461 THRU SN55463SN75461 THRU SN75463DUAL PERIPHERAL DRIVERSabsolute maximum ratings over operating free-air temperature range (unless otherwise noted)†SN55’Supply voltage, VCC (see Note 1)Input voltage, VIIntermitter voltage (see Note 2)Off-state output voltage, VOContinuous collector or output current (see Note 3)Peakcollectororoutputcurrent(tw ≤ 10 ms, duty cycle 10msdutycycle≤ 50%, see Note 4)50%seeNote4)Peak collector or output current (tContinuous total power dissipationOperating free-air temperature range, TAStorage temperature range, TstgCase temperature for 60 seconds, TCLead temperature 1,6 mm (1/16 inch) from case for 60 secondsFK packageJG package75.55.535400500–55 to 125–65 to 150260300SN75’75.55.5354005000 to 70–65 to 150UNITVVVVmAmA°C°C°C°CSee Dissipation Rating TableLead temperature 1,6 mm (1/16 inch) from case for 10 secondsD or P package260°C†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, andfunctional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is notimplied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.NOTES:1.Voltage values are with respect to network GND unless otherwise specified.2.This is the voltage between two emitters A and B.3.This value applies when the base-emitter resistance (RBE) is equal to or less than 500 Ω.4.Both halves of these dual circuits may conduct rated current simultaneously; however, power dissipation averaged over a short timeinterval must fall within the continuous dissipation rating.DISSIPATION RATING TABLEPACKAGEDFKJGPTA ≤ 25°CPOWER RATING725 mW1375 mW1050 mW1000 mWDERATING FACTORABOVE TA = 25°C5.8 mW/°C11.0 mW/°C8.4 mW/°C8.0 mW/°CTA = 70°CPOWER RATING464 mW880 mW672 mW640 mWTA = 125°CPOWER RATING–275 mW210 mW–recommended operating conditionsSN55’MINSupply voltage, VCCHigh-level input voltage, VIHLow-level input voltage, VILOperating free-air temperature, TA4.520.8–551250NOM5MAX5.5MIN4.7520.870SN75’NOM5MAX5.25UNITVVV°C2POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.comSLRS022A – DECEMBER 1976 – REVISED OCTOBER 1995SN55461 THRU SN55463SN75461 THRU SN75463DUAL PERIPHERAL DRIVERSlogic symbol†1A1B2A2B1267&31Ylogic diagram (positive logic)1A1B2Y2A2B12674GND52Y31Y5†This symbol is in accordance with ANSI/IEEE Std 91-1984and IEC Publication 617-12.Pin numbers shown are for D, JG, and P packages.FUNCTION TABLE (each driver)ALLHHBLHLHYL (on state)L (on state)L (on state)H (off state)ABschematic (each driver)VCC4 kΩ1.6 kΩ130 ΩYpositive logic:Y = AB or A + B500 Ω1 kΩGNDResistor values shown are nominal.electrical characteristics over recommended operating free-air temperature rangePARAMETERVIKIOHInput clamp voltageHighleveloutputcurrentHigh-level output currentTESTCONDITIONS†TEST CONDITIONSVCC = MIN,VCC = MIN,,VOH = 35 VII = –12 mAVIH = MIN,,0250.25050.5SN55461MINTYP‡MAX–1.2–1.5300050.5080.8140–18–1.611–180250.25050.5SN75461MINTYP‡MAX–1.2–1.5100040.4V070.7140–1.61176mAµAmAmAmAUNITVµAVOLLowleveloutputvoltageLow-level output voltageVCC = MIN,,VIL = 0.8 V,,IOL = 100 mAVCC = MIN,,VIL = 0.8 V,,IOL = 300 mAVCC = MAX,VCC = MAX,VCC = MAX,VCC = MAX,VI = 5.5 VVI = 2.4 VVI = 0.4 VVI = 5 VIIIIHIILICCHInput current at maximum input voltageHigh-level input currentLow-level input currentSupply current, outputs highICCLSupply current, outputs lowVCC = MAX,VI = 0567656†For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.‡All typical values are at VCC = 5 V, TA = 25°C.switching characteristics, VCC = 5 V, TA = 25°CPARAMETERtPLHtPHLtTLHtTHLVOHPropagation delay time, low-to-high-level outputPropagation delay time, high-to-low-level outputTransition time, low-to-high-level outputTransition time, high-to-low-level outputHighleveloutputvoltageafterswitchingHigh-level output voltage after switchingSN55461SN75461VS = 30 V,See Figure 2IO ≈ 300 mA,VS–10IO ≈ 200 mA,,RL = 50 Ω,CL = 15 pF,,See Figure 1TEST CONDITIONSMINTYP3025810VS–10MAX55402020mVnsUNITPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•3元器件交易网www.cecb2b.comSLRS022A – DECEMBER 1976 – REVISED OCTOBER 1995SN55461 THRU SN55463SN75461 THRU SN75463DUAL PERIPHERAL DRIVERSlogic symbol†1A1B2A2B1267&31Ylogic diagram (positive logic)1A1B2Y2A2B12674GND52Y31Y5†This symbol is in accordance with ANSI/IEEE Std 91-1984and IEC Publication 617-12.Pin numbers shown are for D, JG, and P packages.FUNCTION TABLE (each driver)ALLHHBLHLHYH (off state)H (off state)H (off state)L (on state)ABschematic (each driver)4 kΩ1.6 kΩ1.6 kΩVCC130 ΩYpositive logic:Y = AB or A + B1 kΩ1 kΩ500 ΩGNDResistor values shown are nominal.electrical characteristics over recommended operating free-air temperature rangePARAMETERVIKIOHInput clamp voltageHighleveloutputcurrentHigh-level output currentTEST CONDITIONSTESTCONDITIONS†VCC = MIN,VCC = MIN,,VOH = 35 VII = –12 mAVIL = 0.8 V,,0250.25050.5SN55462MINTYP‡MAX–1.2–1.5300050.5080.8140–1.113–1.617–1.1130250.25050.5SN75462MINTYP‡MAX–1.2–1.5100040.4V070.7140–1.61776mAµAmAmAmAUNITVµAVOLLowleveloutputvoltageLow-level output voltageVCC = MIN,,VIH = MIN,,IOL = 100 mAVCC = MIN,,VIH = MIN,,IOL = 300 mAVCC = MAX,VCC = MAX,VCC = MAX,VCC = MAX,VI = 5.5 VVI = 2.4 VVI = 0.4 VVI = 0IIIIHIILICCHInput current at maximum input voltageHigh-level input currentLow-level input currentSupply current, outputs highICCLSupply current, outputs lowVCC = MAX,VI = 5 V617661†For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.‡All typical values are at VCC = 5 V, TA = 25°C.switching characteristics, VCC = 5 V, TA = 25°CPARAMETERtPLHtPHLtTLHtTHLVOHPropagation delay time, low-to-high-level outputPropagation delay time, high-to-low-level outputTransition time, low-to-high-level outputTransition time, high-to-low-level outputHighleveloutputvoltageafterswitchingHigh-level output voltage after switchingSN55462SN75462VS = 30 V,See Figure 2IO ≈ 300 mA,VS–10IO ≈ 200 mA,,RL = 50 Ω,CL = 15 pF,,See Figure 1TEST CONDITIONSMINTYP45301310VS–10MAX65502520mVnsUNIT4POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.comSLRS022A – DECEMBER 1976 – REVISED OCTOBER 1995SN55461 THRU SN55463SN75461 THRU SN75463DUAL PERIPHERAL DRIVERSlogic symbol†1A1B2A2B1267≥131Ylogic diagram (positive logic)1A1B2Y2A2B12674GND52Y31Y5†This symbol is in accordance with ANSI/IEEE Std 91-1984and IEC Publication 617-12.Pin numbers shown are for D, JG, and P packages.FUNCTION TABLE (each driver)ALLHHBLHLHYL (on state)H (off state)H (off state)H (off state)ABschematic (each driver)VCC4 kΩ1.6 kΩ4 kΩ130 ΩYpositive logic:Y = A + B or AB1 kΩResistor values shown are nominal.500 ΩGNDelectrical characteristics over recommended operating free-air temperature rangePARAMETERVIKIOHInput clamp voltageHighleveloutputcurrentHigh-level output currentTEST CONDITIONSTESTCONDITIONS†VCC = MIN,VCC = MIN,,VOH = 35 VII = –12 mAVIH = MIN,,0250.25050.5SN55463MINMAXTYP‡–1.2–1.5300050.5080.8140–18–1.611–180250.25050.5SN75463MINMAXTYP‡–1.2–1.5100040.4V070.7140–1.61176mAµAmAmAmAUNITVµAVOLLowleveloutputvoltageLow-level output voltageVCC = MIN,,VIL = 0.8 V,,IOL = 100 mAVCC = MIN,,VIL = 0.8 V,,IOL = 300 mAVCC = MAX,VCC = MAX,VCC = MAX,VCC = MAX,VI = 5.5 VVI = 2.4 VVI = 0.4 VVI = 5 VIIIIHIILICCHInput current at maximum input voltageHigh-level input currentLow-level input currentSupply current, outputs highICCLSupply current, outputs lowVCC = MAX,VI = 0587658†For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.‡All typical values are at VCC = 5 V, TA = 25°C.switching characteristics, VCC = 5 V, TA = 25°CPARAMETERtPLHtPHLtTLHtTHLVOHPropagation delay time, low-to-high-level outputPropagation delay time, high-to-low-level outputTransition time, low-to-high-level outputTransition time, high-to-low-level outputHighleveloutputvoltageafterswitchingHigh-level output voltage after switchingSN55463SN75463VS = 30 V,See Figure 2IO ≈ 300 mA,VS–10IO ≈ 200 mA,,RL = 50 Ω,CL = 15 pF,,See Figure 1TEST CONDITIONSMINTYP3025810VS–10MAX55402525mVnsUNITPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•5元器件交易网www.cecb2b.comSLRS022A – DECEMBER 1976 – REVISED OCTOBER 1995SN55461 THRU SN55463SN75461 THRU SN75463DUAL PERIPHERAL DRIVERSPARAMETER MEASUREMENT INFORMATION≤ 5 nsInput2.4 V’461’462PulseGenerator(see Note A)10 VRL = 50 ΩOutputCircuitUnderTest(see Note B)Input’461’46390%1.5 V10%10%0.5 µs90%1.5 V10%tPHL’4630.4 VTEST CIRCUITNOTES:A.The pulse generator has the following characteristics: PRR ≤ 1 MHz, ZO ≈ 50 Ω.B.CL includes probe and jig capacitance.GNDSUB90%OutputtTHLVOLTAGE WAVEFORMS50%10%50%10%tTLH90%1.5 V10%tPLH90%≤ 10 ns≤ 10 ns90%1.5 V3 V0 V3 V≤ 5 nsInput’462CL = 15 pF(see Note B)0 VVOHVOLFigure 1. Test Circuit and Voltage Waveforms for Switching TimesVS = 30 V2 mH1N306465 ΩOutputCircuitUnderTest(see Note B)≤ 5 nsInput’462CL = 15 pF(see Note B)OutputVOLVOLTAGE WAVEFORMS10%90%1.5 V90%1.5 V10%0 VVOH≤ 5 nsInput’461’46390%1.5 V10%10%40 µs≤ 10 ns3 V≤ 10 ns90%1.5 V0 V3 VInput2.4 V’461’4625 VPulseGenerator(see Note A)’4630.4 VGNDSUBTEST CIRCUITNOTES:A.The pulse generator has the following characteristics: PRR ≤ 12.5 kHz, ZO = 50 Ω.B.CL includes probe and jig capacitance.Figure 2. Test Circuit and Voltage Waveforms for Latch-Up Test6POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com
PACKAGEOPTIONADDENDUM
www.ti.com
17-Oct-2005
PACKAGINGINFORMATION
OrderableDeviceJM38510/12908BPAJM38510/12909BPA
SN55461JGSN55462JGSN55463JGSN75461DSN75461PSN75462DSN75462DE4SN75462DRSN75462DRE4SN75462PSN75462PE4SN75463DSN75463DRSN75463PSN75463PE4SNJ55461FKSNJ55461JGSNJ55462FKSNJ55462JGSNJ55463JG
(1)
Status(1)ACTIVEOBSOLETEOBSOLETEOBSOLETEOBSOLETEOBSOLETEOBSOLETEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEOBSOLETEOBSOLETEACTIVEACTIVEOBSOLETEOBSOLETEACTIVEACTIVEOBSOLETE
PackageTypeCDIPCDIPCDIPCDIPCDIPSOICPDIPSOICSOICSOICSOICPDIPPDIPSOICSOICPDIPPDIPLCCCCDIPLCCCCDIPCDIP
PackageDrawingJGJGJGJGJGDPDDDDPPDDPPFKJGFKJGJG
PinsPackageEcoPlan(2)
Qty888888888888888882082088
11505075751
TBDTBDTBDTBDTBDTBDTBDGreen(RoHS&noSb/Br)Green(RoHS&noSb/Br)
Lead/BallFinishA42SNPBCallTICallTICallTICallTICallTICallTICUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCUNIPDAUCallTICallTICUNIPDAUCUNIPDAUCallTICallTIA42SNPBCallTI
MSLPeakTemp(3)Level-NC-NC-NCCallTICallTICallTICallTICallTICallTI
Level-1-260C-UNLIMLevel-1-260C-UNLIMLevel-1-260C-UNLIMLevel-1-260C-UNLIMLevel-NC-NC-NCLevel-NC-NC-NCCallTICallTI
Level-NC-NC-NCLevel-NC-NC-NCCallTICallTI
Level-NC-NC-NCCallTI
2500Green(RoHS&
noSb/Br)2500Green(RoHS&
noSb/Br)5050
Pb-Free(RoHS)Pb-Free(RoHS)TBDTBDPb-Free(RoHS)Pb-Free(RoHS)TBDTBDTBDTBDTBD
POST-PLATELevel-NC-NC-NC
Themarketingstatusvaluesaredefinedasfollows:ACTIVE:Productdevicerecommendedfornewdesigns.
LIFEBUY:TIhasannouncedthatthedevicewillbediscontinued,andalifetime-buyperiodisineffect.
NRND:Notrecommendedfornewdesigns.Deviceisinproductiontosupportexistingcustomers,butTIdoesnotrecommendusingthispartinanewdesign.
PREVIEW:Devicehasbeenannouncedbutisnotinproduction.Samplesmayormaynotbeavailable.OBSOLETE:TIhasdiscontinuedtheproductionofthedevice.
(2)
EcoPlan-Theplannedeco-friendlyclassification:Pb-Free(RoHS)orGreen(RoHS&noSb/Br)-pleasecheckhttp://www.ti.com/productcontentforthelatestavailabilityinformationandadditionalproductcontentdetails.TBD:ThePb-Free/Greenconversionplanhasnotbeendefined.
Pb-Free(RoHS):TI'sterms\"Lead-Free\"or\"Pb-Free\"meansemiconductorproductsthatarecompatiblewiththecurrentRoHSrequirementsforall6substances,includingtherequirementthatleadnotexceed0.1%byweightinhomogeneousmaterials.Wheredesignedtobesolderedathightemperatures,TIPb-Freeproductsaresuitableforuseinspecifiedlead-freeprocesses.
Green(RoHS&noSb/Br):TIdefines\"Green\"tomeanPb-Free(RoHScompatible),andfreeofBromine(Br)andAntimony(Sb)basedflameretardants(BrorSbdonotexceed0.1%byweightinhomogeneousmaterial)
(3)
MSL,PeakTemp.--TheMoistureSensitivityLevelratingaccordingtotheJEDECindustrystandardclassifications,andpeaksoldertemperature.
Addendum-Page1
元器件交易网www.cecb2b.com
PACKAGEOPTIONADDENDUM
www.ti.com
17-Oct-2005
ImportantInformationandDisclaimer:TheinformationprovidedonthispagerepresentsTI'sknowledgeandbeliefasofthedatethatitisprovided.TIbasesitsknowledgeandbeliefoninformationprovidedbythirdparties,andmakesnorepresentationorwarrantyastotheaccuracyofsuchinformation.Effortsareunderwaytobetterintegrateinformationfromthirdparties.TIhastakenandcontinuestotakereasonablestepstoproviderepresentativeandaccurateinformationbutmaynothaveconducteddestructivetestingorchemicalanalysisonincomingmaterialsandchemicals.TIandTIsuppliersconsidercertaininformationtobeproprietary,andthusCASnumbersandotherlimitedinformationmaynotbeavailableforrelease.
InnoeventshallTI'sliabilityarisingoutofsuchinformationexceedthetotalpurchasepriceoftheTIpart(s)atissueinthisdocumentsoldbyTItoCustomeronanannualbasis.
Addendum-Page2
元器件交易网www.cecb2b.comMECHANICAL DATAMCER001A – JANUARY 1995 – REVISED JANUARY 1997JG (R-GDIP-T8)0.400 (10,16)0.355 (9,00)85CERAMIC DUAL-IN-LINE0.280 (7,11)0.245 (6,22)140.065 (1,65)0.045 (1,14)0.063 (1,60)0.015 (0,38)0.020 (0,51) MIN0.310 (7,87)0.290 (7,37)0.200 (5,08) MAXSeating Plane0.130 (3,30) MIN0.023 (0,58)0.015 (0,38)0.100 (2,54)0.014 (0,36)0.008 (0,20)0°–15°4040107/C 08/96NOTES:A.B.C.D.E.All linear dimensions are in inches (millimeters).This drawing is subject to change without notice.This package can be hermetically sealed with a ceramic lid using glass frit.Index point is provided on cap for terminal identification.Falls within MIL STD 1835 GDIP1-T8POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com MECHANICAL DATA MLCC006B – OCTOBER 1996FK (S-CQCC-N**) 28 TERMINAL SHOWNLEADLESS CERAMIC CHIP CARRIER18171615141312NO. OFTERMINALS**111028987668584445220AMIN0.342(8,69)0.442(11,23)0.640(16,26)0.739(18,78)0.938(23,83)1.141(28,99)MAX0.358(9,09)0.458(11,63)0.660(16,76)0.761(19,32)0.962(24,43)1.165(29,59)MIN0.307(7,80)0.406(10,31)0.495(12,58)0.495(12,58)0.850(21,6)1.047(26,6)BMAX0.358(9,09)0.458(11,63)0.560(14,22)0.560(14,22)0.858(21,8)1.063(27,0)192021B SQ22A SQ23242526272812340.080 (2,03)0.064 (1,63)0.020 (0,51)0.010 (0,25)0.020 (0,51)0.010 (0,25)0.055 (1,40)0.045 (1,14)0.045 (1,14)0.035 (0,89)0.028 (0,71)0.022 (0,54)0.050 (1,27)0.045 (1,14)0.035 (0,89)4040140/D 10/96NOTES:A.B.C.D.E.All linear dimensions are in inches (millimeters).This drawing is subject to change without notice.This package can be hermetically sealed with a metal lid.The terminals are gold plated.Falls within JEDEC MS-004POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.comMECHANICAL DATAMPDI001A – JANUARY 1995 – REVISED JUNE 1999P (R-PDIP-T8)0.400 (10,60)0.355 (9,02)85PLASTIC DUAL-IN-LINE0.260 (6,60)0.240 (6,10)140.070 (1,78) MAX0.325 (8,26)0.300 (7,62)0.015 (0,38)0.200 (5,08) MAXSeating Plane0.125 (3,18) MIN0.010 (0,25) NOMGage Plane0.020 (0,51) MIN0.100 (2,54)0.021 (0,53)0.015 (0,38)0.010 (0,25)M0.430 (10,92)MAX4040082/D 05/98NOTES:A.All linear dimensions are in inches (millimeters).B.This drawing is subject to change without notice.C.Falls within JEDEC MS-001For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htmPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com
元器件交易网www.cecb2b.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. To minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:ProductsAmplifiersData ConvertersDSPInterfaceLogicPower MgmtMicrocontrollers
amplifier.ti.comdataconverter.ti.comdsp.ti.cominterface.ti.comlogic.ti.compower.ti.commicrocontroller.ti.com
ApplicationsAudioAutomotiveBroadbandDigital ControlMilitary
Optical NetworkingSecurityTelephonyVideo & ImagingWireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
www.ti.com/audiowww.ti.com/automotivewww.ti.com/broadbandwww.ti.com/digitalcontrolwww.ti.com/militarywww.ti.com/opticalnetworkwww.ti.com/securitywww.ti.com/telephonywww.ti.com/videowww.ti.com/wireless